Layout Table~Martin H Dunn Ltd
Prices exclude VAT.
Some of these dials i.e. D0058 are intended for use with specific mechanical movements, however, by removing the false plate they can just as easily be used with quartz.
Other square dials are not fitted with false plates for fitting directly to a mechanical movement. These are intended for use with either mechanical or quartz movements.
We can supply winding hole dimensions if you need to drill a dial.
Please ring if you need advice.~~~793~793~~

D0055 250 mm square dial~250 mm x 250 mm Square dial. 2 Versions are available.

Fitted with a false plate Hermle W0451-053 and W1151-053 movements, Or
With 2 slots for chime an strike silencing as used on Kieninger movements.

Will fit our Hermle H451 and H1151 movements.
Plate is Solid Brass.
Spandels are Metal.
Chapter ring is printed onto silver laqured aluminium.~~D 0055/451 250 mm square dial.|453|D 0055/Kieninger|456|~793~796~~

D0058 250 mm square dial~250 mm x 250 mm Square dial.
Fitted with a false plate Hermle W0451-053 and W1151-053 movements
Will fit our Hermle H451 and H1151 movements.
Plate is Brass on aluminium.
Spandels are Metal.
Chapter ring is printed onto silver laqured aluminium.~~D 0058/451 250 mm square dial.|453|~793~795~~

D0068P 280 mm square dial~280 x 280 mm Square dial.
Fitted fith a false plate for use with Hermle W0451-053 or W1151-053 Movements.
Fits our H451 and 1151 movements.
Dial plate is Brass on aluminium.
Spandrels are metal.
Centre is Brass with an Etched or engraved Pansy design.Chapter ring has printed numbers on silver laquered aluminium.~~D 0068P/451|454|~793~794~~

D0068R 280 mm square dial~280 x 280 mm Square dial.
Fitted fith a false plate for use with Hermle W0451-053 or W1151-053 Movements.
Fits our H451 and 1151 movements.
Dial plate is Brass on aluminium.
Spandrels are metal.
Centre is Brass with an Etched or engraved Pansy design.Chapter ring has superb Roman Numerals applied.~~D 0068R/451|454|~793~797~~

D0073 200 mm square dial~200 mm x 200 mm Square dial.
This dial is not fitted with a false plate.
If you need winding holes wee can supply a sheet showing the dimentions for any movement we sell.

SEE T0500 in our tool section.

Plate is Brass on aluminium.
Spandels are Metal.
Chapter ring is printed onto silver laqured aluminium.~~D 0073 200 mm square dial.|453|~793~869~~

D0091 168 mm square dial~168 mm x 168 mm Square dial.
This dial is not fitted with a false plate.
If you need winding holes wee can supply a sheet showing the dimentions for any movement we sell.

SEE T0500 in our tool section.

Plate is Aluminium painted white.
Chapter ring is printed onto the dial.

Please note that the picture is the round version. This dial is square.~~D 0091 168 mm square dial.|453|~793~871~~

D0093 168 mm square dial~168 mm x 168 mm Square dial.
This dial is not fitted with a false plate.
If you need winding holes wee can supply a sheet showing the dimentions for any movement we sell.

SEE T0500 in our tool section.

Plate is Brass.
Chapter ring is printed onto the dial.~~D 0093 168 mm square dial.|453|~793~870~~