Layout Table~
Wall clocks are often called 'Regulators'or 'Vienna regulators'.

Many of these have dials fitted. Most will need winding holes in the dial.

Prices on this page exclude Vat (UK sales Tax)

~~~767~767~~

H 131 .A. Wall clock movement.~Hermle 131-070 movement. 31 cm version.
Key wound, 8 day.
Ting-Tang strike on 2 rear mounted bells.

• Minimum case depth (inside.) 105 mm

.

• Dial centre to pendulum tip. 24.5 cm

~Typical metal rod pendulum.~H 131.A. Movement|447|~767~783~~

H 141.A. Regulator movement~Hermle 141-041 Regulator movement. 38 cm version.
8 Day.
Complete with mounting feet, A & R Grid-iron pendulum, coil gong and key.
Strikes once on the half hour and counts the hours.
If you purchase the movement and dial at the same time you will receive suitable hands free of charge.
This movement is supplied with mounting feet. If you require a mounting sled order our part Number A1050

Dials are supplied seperately. See 'Dials only for Hermle 141 movements' in our dial section.

• Minimum case depth (inside.) 100 mm

.

• Dial centre to pendulum tip 320 mm

~~H 141.A. Regulator|446|~767~782~~

H 141.B. Regulator movement~Hermle 141-041 Regulator movement. 45 cm version.
8 Day.
Complete with mounting feet, A & R Grid-iron pendulum, coil gong and key.
Strikes once on the half hour and counts the hours.
If you purchase the movement and dial at the same time you will receive suitable hands free of charge.
This movement is supplied with mounting feet. If you require a mounting sled order our part Number A1050

Dials are supplied seperately. See 'Dials only for Hermle 141 movements' in our dial section.

• Minimum case depth (inside.) 100 mm

.

• Dial centre to pendulum tip 385 mm

~~H 141.B. Regulator|446|~767~1224~~

A1050 Mounting Sled for H 141 Regulator movement~This is an alternate mounting sled or seat bracket for Hermle 141 Regulator movements.

This is to make mounting the movement into your case easier. It is not essential.
Supplied with screws and fittings.~~A 1050 Sled for H 141|446|~767~1529~~

H241.A. Weight driven regulator~Hermle W241-840 Regulator movement. Without dial. See H 241 dials in dial section
Strikes on coil gong, once on the half hour and counts the hours.
Weight driven on metal cables. Wound through the dial with a wooden handled cranked key.Supplied with polished brass weight shell and weight fillings.
Complete with a wooden rod pendulum with 115 mm polished brass bob.

• Minimum case depth (inside.) 105 mm

.

• Dial centre to bottom of weight for 7 day run 803 mm, (868 for 8 day run). This is below the pendulum tip.

~Example of wooden rod pendulum.~H 241.A. Movement|475|~767~821~~

H241.B. Weight driven regulator~Hermle W241-840 Regulator movement. Without dial. See H 241 dials in dial section
Strikes on coil gong, once on the half hour and counts the hours.
Weight driven on metal cables. Wound through the dial with a wooden handled cranked key.Supplied with polished brass weight shell and weight fillings.
Complete with a metal rod pendulum with 80 mm polished brass bob.

• Minimum case depth (inside.) 105 mm

.

• Dial centre to bottom of weight for 7 day run 803 mm, (868 for 8 day run). This is below the pendulum tip.

~Example of metal rod pendulum. ~H 241.B. Movement|475|~767~822~~

H241.C. Weight driven regulator~Hermle W241-840 Regulator movement. Without dial. See H 241 dials in dial section
Strikes on coil gong, once on the half hour and counts the hours.
Weight driven on metal cables. Wound through the dial with a wooden handled cranked key.Supplied with polished brass weight shell and weight fillings.
Complete with a Grid-Iron pendulum with 115 mm polished brass bob.

• Minimum case depth (inside.) 105 mm

.

• Dial centre to bottom of weight for 7 day run 803 mm, (868 for 8 day run). This is below the pendulum tip.

~Example of Grid-Iron pendulum. ~H 241.C. Movement|475|~767~823~~

H241.D. Weight driven regulator~Hermle W241-840 Regulator movement. Without dial. See H 241 dials in dial section
Strikes on coil gong, once on the half hour and counts the hours.
Weight driven on metal cables. Wound through the dial with a wooden handled cranked key.Supplied with polished brass weight shell and weight fillings.
Complete with a Lyre pendulum with 100 mm polished brass bob.

• Minimum case depth (inside.) 105 mm

.

• Dial centre to bottom of weight for 7 day run 803 mm, (868 for 8 day run). This is below the pendulum tip.

~Example of Grid-Iron pendulum. ~H 241.D. Movement|475|~767~825~~

H241.E. Weight driven regulator~Hermle W241-840 Regulator movement. Without dial. See H 241 dials in dial section
Strikes on coil gong, once on the half hour and counts the hours.
Weight driven on metal cables. Wound through the dial with a wooden handled cranked key.Supplied with polished brass weight shell and weight fillings.
Complete with a Grid-Iron pendulum with 140 mm polished brass bob.

• Minimum case depth (inside.) 105 mm

.

• Dial centre to bottom of weight for 7 day run 803 mm, (868 for 8 day run). This is below the pendulum tip.

~Example of Grid-Iron pendulum. ~H 241.E. Movement|475|~767~824~~

H 341.A. wall movement~
Westminster chime regulator movement.38 cm pendulum version.
8 Day movement, spring driven.
We suggest that you use our 150 mm Traditional regulator dial and hands.Part No D150/341. We also offer other size and style of dials. If you purchase the movement and dial at the same time we give suitable hands, fixings and instructions.
Supplied with R & A grid iron pendulum, mountings and key.

Dials are supplied seperately See 'Dials for H341' in our dials section.

• Minimum case depth (inside.) 110 mm

.

• Dial centre to pendulum tip 340 mm .

~A&R Grid-iron pendulum.

An example of a Traditional Regulator dial (Not included).
Actual dial has 3 winding holes.~H 341.A. Regulator movnt%27 less dial|443|~767~779~~

H 341.C. wall movement~
Westminster chime regulator movement.45 cm pendulum version.
8 Day movement, spring driven.
We suggest that you ues the 150 mm Traditional regulator Part No D 150/341 in the dial section. If the movement and dial are purchased at the same time we supply suitable hands Free of charge.
Supplied with R & A grid iron pendulum, mountings and key.

Dial are supplied seperately. See 'Dials for H341' in our dials section'

• Minimum case depth (inside.) 110 mm

.

• Dial centre to pendulum tip 395 mm.

~A&R Grid-iron pendulum.

An example of a Traditional Regulator dial (Not included)
Actual dial has 3 winding holes.~H 341.C. Regulator movnt%27|443|~767~780~~

H 341.D. wall movement~
Westminster chime regulator movement.45 cm pendulum version.
8 Day movement, spring driven.
We suggest the 150 mm Flat Enamel type dial from the dial section.
Supplied with a grid iron pendulum with a polished brass bob, mountings and key.

Dials are supplied seperately, see 'Dials for H341' in our 'Dial section.'

• Minimum case depth (inside.) 110 mm

.

• Dial centre to pendulum tip 395 mm.

~Plain Bob Grid-iron pendulum.
An example of an Imitation 'Enamel dial.' (Not included) Actual dial has a brass rim~H 341.D. Regulator movnt%27|443|~767~781~~

H 351.A. Wood Rod Pendulum.~HERMLE W 351.830 Side mounted gong allows for the reduced case depth.
Weight driven time train by two brass shelled weights on a yoke.
The yoke is suspended by a pulley on a bronze cable.
Fitted with Automatic night silence mechanism.
Supplied with a wooden rod pendulum with a 115 mm polished brass bob.

Dials are supplied seperately. See dial section.

• Minimum case depth (inside.) 105 mm

.

• Dial centre to Weight bottom after 8 days 665 mm.

~Wooden rod pendulum.~H351.A. Wooden rod|459|~767~798~~

H 351.B. Metal rod pendulum.~HERMLE W 351.830 Side mounted gong allows for the reduced case depth.
Weight driven time train by two brass shelled weights on a yoke.
The yoke is suspended by a pulley on a bronze cable.
Fitted with Automatic night silence mechanism.
Supplied with a Metal (Brass) rod pendulum with 80 mm polished brass bob

Dials are supplied seperately. See dial section.

• Minimum case depth (inside.) 105 mm

.

• Dial centre to Weight bottom after 8 days 665 mm.

~Metal rod pendulum.~H 351.B. Metal Rod|460|~767~803~~

H 351.C. Grid-iron Pendulum.~HERMLE W 351.830 Side mounted gong allows for the reduced case depth.
Weight driven time train by two brass shelled weights on a yoke.
The yoke is suspended by a pulley on a bronze cable.
Fitted with Automatic night silence mechanism.
Supplied with a Grid-Iron pendulum with a 115 mm Polished Brass Bob.

Dials are supplied seperately. See dial section.

• Minimum case depth (inside.) 105 mm

.

• Dial centre to Weight bottom after 8 days 665 mm.

~Example of Grid-Iron Pendulum. ~H351.C. Grid-Iron pend%27 115 mm|461|~767~804~~

H 351.D. Lyre Pendulum.~HERMLE W 351.830 Side mounted gong allows for the reduced case depth.
Weight driven time train by two brass shelled weights on a yoke.
The yoke is suspended by a pulley on a bronze cable.
Fitted with Automatic night silence mechanism.
Supplied with a Lyre pendulum with a 100 mm polished Brass bob.

Dials are supplied seperately. See dial section.

• Minimum case depth (inside.) 105 mm

.

• Dial centre to Weight bottom after 8 days 665 mm.

~Example of a Lyre pendulum.~H351.D. Lyre pendulum|462|~767~805~~

H 351.E. Grid iron Pendulum, 140 mm Bob.~HERMLE W 351.830 Side mounted gong allows for the reduced case depth.
Weight driven time train by two brass shelled weights on a yoke.
The yoke is suspended by a pulley on a bronze cable.
Fitted with Automatic night silence mechanism.

Dials are supplied seperately. See dial section.

• Minimum case depth (inside.) 105 mm

.

• Dial centre to Weight bottom after 8 days 665 mm.

~Example of Grid -Iron pendulum.~H351.E. Grid-iron 140 mm|463|~767~806~~

A1051 Mounting Sled for H 351 Regulator movement~This is an alternate mounting sled or seat bracket for Hermle 351 Regulator movements.

This is to make mounting the movement into your case easier. It is not essential but will make life much easier.
Supplied with screws and fittings. ~~A 1051 Sled for H 351|446|~767~1530~~

H 351.SA Spring Driven Regulator~Spring Driven movement, Hermle W351-031
This movement fills the gap between the case size needed for the smaller spring driven regulators and the larger weight driven models.
The gong and the movement are mounted onto a steel plate. tho complete your clock you simply have to screw the plate to the back of your clock case and hang the pendulum onto the movement.
The 180 mm dial is already fitted.
Supplied with a wooden rod pendulum with 115 mm polished brass bob.

• Minimum case depth (inside.) 100 mm

.

• Dial centre to pendulum tip.700 mm

~Typical Wooden rod pendulum.~H 351.SA with wooden rod pendulum|470|~767~816~~

H 351.SB Spring Driven Regulator~Spring Driven movement, Hermle W351-031
This movement fills the gap between the case size needed for the smaller spring driven regulators and the larger weight driven models.
The gong and the movement are mounted onto a steel plate. tho complete your clock you simply have to screw the plate to the back of your clock case and hang the pendulum onto the movement.
The 180 mm dial is already fitted.
Supplied with a Metal rod pendulum with 80 mm polished brass bob.

• Minimum case depth (inside.) 100 mm

.

• Dial centre to pendulum tip.700 mm

~Typical Metal rod pendulum.~H 351.SB with wooden rod pendulum|470|~767~817~~

H 351.SC Spring Driven Regulator~Spring Driven movement, Hermle W351-031
This movement fills the gap between the case size needed for the smaller spring driven regulators and the larger weight driven models.
The gong and the movement are mounted onto a steel plate. tho complete your clock you simply have to screw the plate to the back of your clock case and hang the pendulum onto the movement.
The 180 mm dial is already fitted.
Supplied with a Grid-Iron pendulum with 115 mm polished brass bob.

• Minimum case depth (inside.) 100 mm

.

• Dial centre to pendulum tip.740 mm

~Typical Grid-Iron pendulum.~H 351.SC with Grid pendulum 115 mm bob|470|~767~818~~

H 351.SD Spring Driven Regulator~Spring Driven movement, Hermle W351-031
This movement fills the gap between the case size needed for the smaller spring driven regulators and the larger weight driven models.
The gong and the movement are mounted onto a steel plate. tho complete your clock you simply have to screw the plate to the back of your clock case and hang the pendulum onto the movement.
The 180 mm dial is already fitted.
Supplied with a Grid-Iron pendulum with 115 mm polished brass bob.

• Minimum case depth (inside.) 100 mm

.

• Dial centre to pendulum tip.740 mm

~Typical Lyre pendulum.~H 351.SD with Lyre pendulum 100 mm bob|470|~767~819~~

H 351.SE Spring Driven Regulator~Spring Driven movement, Hermle W351-031
This movement fills the gap between the case size needed for the smaller spring driven regulators and the larger weight driven models.
The gong and the movement are mounted onto a steel plate. tho complete your clock you simply have to screw the plate to the back of your clock case and hang the pendulum onto the movement.
The 180 mm dial is already fitted.
Supplied with a Grid-Iron pendulum with 140 mm polished brass bob.

• Minimum case depth (inside.) 100 mm

.

• Dial centre to pendulum tip.780 mm

~Typical Grid-Iron pendulum.~H 351.SE with Grid pendulum 140 mm bob|470|~767~820~~

H 771.A. Wall clock movement~
Time piece only. 35 cm. version.
8 day spring driven.Pendulum bob 70 mm diameter.

• Minimum case depth (inside.) 75 mm

.

• Dial centre to pendulum tip 315 mm.

~Example of Metal rod pendulum~H 771.A.|440|~767~768~~

Kieninger Small Regulator KRM (J)~Kieningers 'J' Movement. 35 cm.Superb quality in a small package.
The movement and gong is ready mounted onto a steel plate that you simply screw to the back of your clock case.
Triple chime, plays wittington, Westminster and St Michael. Selected by a small lever.
Automatic night silence is built into the movement and is permenantly selected.
Complete with 150 mm dial. Hands metal rod pendulum. Everything you need to make your case into a clock.

• Minimum case depth (inside.) 117 mm

.

• Dial centre to pendulum tip. 310 mm

~Similar dial (actual dial has 3 winding holes.).
Example of Metal Rod Pendulum.~KRM1 Kieninger Regulator|483|~767~771~~

Kieninger PS 55.A.~Kieningers PS55, 66 cm Version.
Heavy duty movement, weight diven on metal ropes.
This version comes with Automatic night silence.
We have several combinations available. This has a Wooden rod pendulum with a 140 mm polished brass bob.
Supplied with a 178 mm 'Real Enamel' dial and suitable hands.
please note the heavy brass mounting sled.
Supplied with suitable hands, brass weight shells and fillings.
The movement strikes once on the half hour and counts the hours on a heavy coil gong.

• Case depth reuired 125 mm

• Distance from dial centre to bottom of weights after 7 day run 720 mm (880 mm for 8 days).

~Example of Wooden rod pendulum.
~PS55.A. Regulator Movement|484|~767~835~~

Kieninger PS 55.B.~Kieningers PS55, 66 cm Version.
Heavy duty movement, weight diven on metal ropes.
This version comes with Automatic night silence.
We have several combinations available. This has a Grid-Iron pendulum with a 140 mm polished brass bob.
Supplied with a 178 mm 'Real Enamel' dial and suitable hands.
please note the heavy brass mounting sled.
Supplied with suitable hands, brass weight shells and fillings.
The movement strikes once on the half hour and counts the hours on a heavy coil gong.

• Case depth reuired 125 mm

• Distance from dial centre to bottom of weights after 7 day run 720 mm (880 mm for 8 days).

~Example of Grid-Iron pendulum.
Enamel Dial.
~PS55.B. Regulator Movement|484|~767~836~~

Kieninger PS 55.D.~Kieningers PS55, 66 cm Version.
Heavy duty movement, weight diven on metal ropes.
This version comes with Automatic night silence.
We have several combinations available. This has a Wooden rod pendulum with a 140 mm polished brass bob.
Supplied with a 200 mm 'Real Enamel' dial and suitable hands.
please note the heavy brass mounting sled.
Supplied with suitable hands, brass weight shells and fillings.
The movement strikes once on the half hour and counts the hours on a heavy coil gong.

• Case depth reuired 125 mm

• Distance from dial centre to bottom of weights after 7 day run 720 mm (880 mm for 8 days).

~Example of Wooden rod pendulum.
~PS55.D. Regulator Movement|484|~767~833~~

Kieninger PS 55.E.~Kieningers PS55, 66 cm Version.
Heavy duty movement, weight diven on metal ropes.
This version comes with Automatic night silence.
We have several combinations available. This has a Grid-Iron pendulum with a 140 mm polished brass bob.
Supplied with a 200 mm 'Real Enamel' dial and suitable hands.
please note the heavy brass mounting sled.
Supplied with suitable hands, brass weight shells and fillings.
The movement strikes once on the half hour and counts the hours on a heavy coil gong.

• Case depth reuired 125 mm

• Distance from dial centre to bottom of weights after 7 day run 720 mm (880 mm for 8 days).

~Example of Grid-Iron pendulum.
Enamel Dial.
~PS55.E. Regulator Movement|484|~767~837~~

Kieninger RWS.A. Movement*****SPECIAL VERSION****~We have marked this as *****SPECIAL VERSION****** Because of the pendulum length and the dial size.
This is intended for use in the large 9 light 'Lantern Clock.'
Westminster chime on 8 rod gong.
1 second beating wooden rod pendulum with 165 mm polished brass bob.
Driven by two weights mounted on a yoke. The weights are cased in polished brass.
The dial is 240 mm diameter, real enamel with a polished brass rim. Suitable hands are supplied.
The whole unit is mounted onto a cast brass sled.
We suggest that the movement is mounted in a dust free room and that the dimensions are checked befor you buils your clock case.
Please note that the illustration shows a spring driven movement. We will change it later.

• Minimum case depth (inside) 145 mm

• Dial centre to pendulum tip 1064 mm

~Example of wooden rod pendulum.
Example of Kieningers enamel dial.
~RWS.A. One second beat, 240 mm dial|488|~767~834~~

Kieninger RWS.B. Movement,~Kieninger RWS movement. 66 cm version.
Westminster chime on 8 rod gong.
The time side is driven by two brass cased weights on a yoke. The Chime and the hour strike are spring driven.
Supplied with 178 mm 'Real Enamel' dial and suitable hands.
Wooden rod pendulum with 140 mm polishe brass bob.
Mounted on a cast brass sled.

• Minimum case depth (inside) 130 mm

• Dial centre to pendulum tip 617 mm

~Eeample of wooden rod pendulum.

Example of Kieninger enamel dial.
~RWS.B. 178 dial, wooden rod pend|489|~767~839~~

Kieninger RWS.C. Movement,~Kieninger RWS movement. 66 cm version.
Westminster chime on 8 rod gong.
The time side is driven by two brass cased weights on a yoke. The Chime and the hour strike are spring driven.
Supplied with 178 mm 'Real Enamel' dial and suitable hands.
Grid-iron pendulum with 140 mm polishe brass bob.
Mounted on a cast brass sled.

• Minimum case depth 130 mm
  
  

• Dial centre to pendulum tip 657 mm

~Example of Grid-Iron pendulum.

Example of Kieninger enamel dial.
~RWS.C. 200 dial, wooden rod pend|489|~767~838~~

Kieninger RWS.E. Movement,~Kieninger RWS movement. 66 cm version.
Westminster chime on 8 rod gong.
The time side is driven by two brass cased weights on a yoke. The Chime and the hour strike are spring driven.
Supplied with 200 mm 'Real Enamel' dial and suitable hands.
Wooden rod pendulum with 140 mm polished brass bob.
Mounted on a cast brass sled.

• Minimum case depth (inside) 130 mm

• Dial centre to pendulum tip 617 mm

~Eeample of wooden rod pendulum.

Example of Kieninger enamel dial.
~RWS.E. 200 dial, wooden rod pend|489|~767~840~~

Kieninger RWS.F. Movement,~Kieninger RWS movement. 66 cm version.
Westminster chime on 8 rod gong.
The time side is driven by two brass cased weights on a yoke. The Chime and the hour strike are spring driven.
Supplied with 200 mm 'Real Enamel' dial and suitable hands.
Grid-Iron pendulum with 140 mm polishe brass bob.
Mounted on a cast brass sled.

• Minimum case depth (inside) 130 mm

• Dial centre to Pendulum tip 657 mm

~Eeample of wooden rod pendulum.

Example of Kieninger enamel dial.
~RWS.E. 200 dial, Grid pend%27|489|~767~841~~