Page Header~Prices exclude VAT
Martin H Dunn Ltd
Telephone UK (0044) (0) 1469 540 901

~~~55~55~~

Berwick Clock Case Kit~Exclusive to us.
Mahogany Long Case Kit. Makes a Clock of about 6ft 6 inches tall.
Needs either our Hermle H451.A or B. Westminster chime Movements or our H1151.A. or B. Triple chime movements. Plus one of our dials 250 mm x 250 mm 330 mm. We suggest our dials D0011, D1018, D0025, D0027 or D1028. See 250 x 250 x 330 dial section.
You will only need to supply some screws, glass and polishing materials.
Our kits are made by a Craftsman, the moldings used will vary from batch to batch.Don't ask why, it upsets the old chap.

Sorry, we are unable to offer this kit while our cabinet maker is unwell~Please note that this is not a precise illustration of our actual kit.
The kit is made from solid natural wood throughout except as follows.
1. The case floor and the back of the base. These are made from MDF, it is considered that this makes a strong chassis for the case.
2. The trunk back is made from veneered ply, use of solid wood in this position is not practical.~Kit 001 Berwick Longcase kit|450|~55~785~~

Norfolk Clock Case Kit~Exclusive to us.
Mahogany Long Case Kit. Makes a Clock of about 6ft tall.
Needs either our Hermle H451.A or B. Westminster chime Movements or our H1151.A. or B. and one of our dials 250 mm x 250 mm.
See Dial D 0055 and Dial D0058 in our 'Square Dial section'.
You will need to supply Glass, screws and finishing material such as We suggest our dials D0055 or D0058.
These kits are made for use by an experianced craftsman. The moulding will vary from batch to batch. No one knows why. no one dare ask.

Sorry, we are unable to offer this item while our case maker is unwell.~Please note that this is not a precise illustration of our actual kit.
The kit is made from solid natural wood throughout except as follows.
1. The case floor and the back of the base. These are made from MDF, it is considered that this makes a strong chassis for the case.
2. The trunk back is made from veneered ply, use of solid wood in this position is not practical.~KIT 005 Norfolk Long case kit|449|~55~786~~

Regulator Clock Case Kit~Exclusive to us

Available in Oak or Mahogany.

Regulator Clock Case Kit.
Solid wood throughout ( Case back is Veneered plywood).
Designed for our Hermle Regulator movements H 341.C. or H 341.D.~Picture shows a Mahogany case finished with a dark walnut stain.
Both the Mahogany and the Oak case can be finished much lighter colour if required.
Most clients use a 'Drying oil' on their cases and then complete with wax polish.
Try to avoid wax that contains 'silicone'. Silicone can react with other oils and waxes and result in a sticky feel to the surface.~Kitreg 1 M, Spring Reulator Case Kit|451|Kitreg 1 O, Spring Regulator Case kit|452|~55~789~~