This plan has been designed specialy for our Hermle H 451.A. or the H451.B. movements.
These are the most popular longcase clock movement in the UK.
To complete your clock you will need the movement and one of our 250 X 330mm dials. We suggest that you use D 0027 from our dial section although there are but there are several others to choose from.
The plan also includes details of an alterative top which uses a 250 mm square dial. (See dials D0055 or D 0058)
The complete clock stands 1828 mm tall with the 250 x 330 dial and about 1750 mm with the square dial.

Plan for a large Bracket clock.
404 mm tall, 274 wide and 152 mm deep.
The design is intended for use with a chiming mechanical movements. A quartz can be used if you prefer.
This plan makes a grand and imposing clock.
Remember to check the sizes of the movement you are using.
The movement sizes are on the page for each movement.
If you need more help please telephone.

This plan has been designed specialy for our Hermle H 341 or H 141 movements.
These are the most popular of the smaller Vienna movements in the UK.
To complete your clock you will need the movement and one of our 150 mm Vienna dials. The illustration shows the 2 zone Regulator dial. If purchased at the same time the hands are supplied free of charge
As an alternative you might also consider our Quartz Vienna movement.
The h141 movement needs less case depth than the H341 (Westminster Chime). We will advise if you ask.

This Pack is in leaflet form. It contains details of 3 longcase(Gandfather ) clocks, 2 Wall (Regulator)clocks and 1 Table (Bracket)clock.
This pack gives a good start for most clock projects.Remember to check the sizes of the movement you are using.
The movement sizes are on the page for each movement. If you need more help please telephone.

This Pack is in booklet form.
The designs are suitable for mechanical and Quartz movements
.It contains details of 1 longcase(Gandfather ) clocks, 1 Wall (Regulator)clocks, 2 Table (Bracket)clock and 1 Barometer
The smallest bracket clock is best fitted with a quartz movement.
This pack gives a good start for most clock projects. Remember to check the sizes of the movement you are using.The movement sizes are on the page for each movement. If you need more help please telephone.

Plan for a Bell Top Bracket clock.. 251 mm tall, 216 wide and 133 mm deep.
The design isintended for use with a striking mechanical movements. A quartz can be used if you prefer.
This plan makes a good sized but not over large clock.
Remember to check the sizes of the movement you are using.
The movement sizes are on the page for each movement. If you need more help please telephone.

Plan for a weight driven clock that is a copy of a 17th Century clock.
Overall height of the finished clock is about 2756 mm . Width is 470mm and depth 275mm.

Please note that this is a plan of an 'old clock', it will need modifying to take modern movements.

Plan for a large weight driven regulator clock.
Overall height of the finished clock varies with the clock movement but is about 1325 mm . Width is 338mm and depth 156mm.
Please note that this plan will need modifying to suit the movement that you wish to fit into it. There are several suggested sizes included, this makes life much easier.
I have seen this clock when completed, it is most impresive.

Plan for a weight driven clock that is made almost entirely from wood.
Overall height of the finished clock is about 486 mm (excluding the weights).
The plans set includes patterns for cutting the gear, 3 full size drawings and a 4 page booklete of instructions.
Your completed clock will need mounting on a wall to allow for the weights to fall.

By Tim & Peter Ashby.
This book contains plans and instructions for 20 different clock cases.
Please remember that with any clock plan you may have to make slight adjustments to accomodate your choice of clock movement.
We are always happy to offer adviceto our clients.