Best Sellers

The illustration shows 2 views of a typical Quartz movement with the fittings supplied with it. The movement is 58 m x 58 mm x 18 mm They are available in 3 different spindle lenghts. This is to accomodate different dial thicknesses. Our Part No Q1001 S is an 11 mm Spindle. It is for dials up to 4 mm thick. Our Part No Q1001 M Is a 16 mm spindle for dials up to 8 mm thick. Our Part No Q1001 L is a 21 mm spindle for dials up to 12 mm thick. Our part No Q1001 Internet Gives 10 pieces of Q1001 m and 10 pairs of Hands HQ 094 BA 1P at a special price.

The illustration shows 2 views of a U.T.S Quartz movement with the fittings supplied with it.
The movement is 58 m x 58 mm x 18 mm
They are available in 3 different spindle lenghts. This is to accomodate different dial thicknesses.
Our Part No Q1001 S is an 11 mm Spindle. It is for dials up to 4 mm thick.
Our Part No Q1001 M Is a 16 mm spindle for dials up to 8 mm thick.
Our Part No Q1001 L is a 21 mm spindle for dials up to 12 mm thick.
Our part No Q1001 Internet Gives 10 pieces of Q1001 m and 10 pairs of Hands HQ 094 BA 1P at a special price.

Wall clock movements
Online Catalogue | Clock Builders Supplies | Mechanical Clock Movements | Wall clock movements

A 1050 Sled for H 141
in stock.
OUT OF STOCK

Price: £8.89 (Excluding VAT at 20%)
Quantity:

This is an alternate mounting sled or seat bracket for Hermle 141 Regulator movements.
This is to make mounting the movement into your case easier. It is not essential.
Supplied with screws and fittings.

A 1051 Sled for H 351
in stock.
OUT OF STOCK

Price: £34.78 (Excluding VAT at 20%)
Quantity:

This is an alternate mounting sled or seat bracket for Hermle 351 Regulator movements.
This is to make mounting the movement into your case easier. It is not essential but will make life much easier.
Supplied with screws and fittings.
You will have to fit a packing piece behind ypour gong when you use this sled.

H 131.A. Movement
in stock.
OUT OF STOCK

Price: £81.36 (Excluding VAT at 20%)
Quantity:

Hermle 131-070 movement. 31 cm version.
Key wound, 8 day.
Ting-Tang strike on 2 rear mounted bells.

Minimum case depth (inside.) 105 mm
Dial centre to pendulum tip. 24.5 cm

H 141.A. Regulator
in stock.
OUT OF STOCK

Price: £93.17 (Excluding VAT at 20%)
Quantity:

Hermle 141-041 Regulator movement. 38 cm version.
8 Day.
Complete with mounting feet, A & R Grid-iron pendulum, coil gong and key.
Strikes once on the half hour and counts the hours.
If you purchase the movement and dial at the same time you will receive suitable hands free of charge.
This movement is supplied with mounting feet.
If you require a mounting sled order our part Number A1050
Dials are supplied seperately. See 'Dials only for Hermle 141 movements' in our dial section.

Minimum case depth (inside.) 100 mm
Dial centre to pendulum tip 318 mm

H 141.B. Regulator
in stock.
OUT OF STOCK

Price: £96.19 (Excluding VAT at 20%)
Quantity:

Hermle 141-041 Regulator movement. 45 cm version.
8 Day.
Complete with mounting feet, A & R Grid-iron pendulum, coil gong and key.
Strikes once on the half hour and counts the hours.
If you purchase the movement and dial at the same time you will receive suitable hands free of charge
This movement is supplied with mounting feet. If you require a mounting sled order our part Number A1050
Dials are supplied seperately. See 'Dials only for Hermle 141 movements' in our dial section.

Minimum case depth (inside.) 100 mm
Dial centre to pendulum tip 385 mm

H 341.A. Regulator
in stock.
OUT OF STOCK

Price: £135.00 (Excluding VAT at 20%)
Quantity:

Hermle 341-020 Regulator movement. 38.5 cm pendulum version.
8 Day.
Complete with mounting feet, A & R Grid-iron pendulum, 5 Rod gong and key.
Full Westminster chime 4/4 Chimes on each quarter and counts the hours.
Chime shut off lever.
If you purchase the movement and dial at the same time you will receive suitable hands free of charge.
This movement is supplied with mounting feet.
Dials are supplied seperately. See 'Dials only for Hermle 341 movements' in our dial section.

Minimum case depth (inside.) 110 mm
Dial centre to pendulum tip 340 mm

H 341.C. Regulator
in stock.
OUT OF STOCK

Price: £135.00 (Excluding VAT at 20%)
Quantity:

Hermle 341-020 Regulator movement. 45 cm pendulum version.
8 Day.
Complete with mounting feet, A & R Grid-iron pendulum, 5 Rod gong and key.
Full Westminster chime 4/4 Chimes on each quarter and counts the hours.
Chime shut off lever.
If you purchase the movement and dial at the same time you will receive suitable hands free of charge.
This movement is supplied with mounting feet.
Dials are supplied seperately. See 'Dials only for Hermle 341 movements' in our dial section.

Minimum case depth (inside.) 110 mm
Dial centre to pendulum tip 415 mm

H 341.D. Regulator
in stock.
OUT OF STOCK

Price: £155.00 (Excluding VAT at 20%)
Quantity:

Hermle 341-020 Regulator movement. 45 cm pendulum version.
8 Day.
Complete with mounting feet, A & R Grid-iron pendulum, 5 Rod gong and key.
Full Westminster chime 4/4 Chimes on each quarter and counts the hours.
AUTOMATIC NIGHT SILENCE
If you purchase the movement and dial at the same time you will receive suitable hands free of charge.
This movement is supplied with mounting feet.
Dials are supplied seperately. See 'Dials only for Hermle 341 movements' in our dial section.

Minimum case depth (inside.) 110 mm
Dial centre to pendulum tip 415 mm

H351.A. Wooden rod
in stock.
OUT OF STOCK

Price: £278.00 (Excluding VAT at 20%)
Quantity:

HERMLE W 351.830 With Westminster chime.
Side mounted gong allows for the reduced case depth.
Weight driven time train by two brass shelled weights on a yoke.
The yoke is suspended by a pulley on a bronze cable.
Fitted with Automatic night silence mechanism.
Supplied with a wooden rod pendulum with a 115 mm polished brass bob.
Dials are supplied seperately.
See dial section.

Minimum case depth (inside.) 115 mm
Dial centre to Weight bottom after 8 days 665 mm.
Dial centre to pendulum tip 590 mm.

H 351.B. Metal Rod
in stock.
OUT OF STOCK

Price: £278.00 (Excluding VAT at 20%)
Quantity:

HERMLE W 351.830
Side mounted gong allows for the reduced case depth.
Weight driven time train by two brass shelled weights on a yoke.
The yoke is suspended by a pulley on a bronze cable.
Fitted with Automatic night silence mechanism.
Supplied with a Metal (Brass) rod pendulum with 80 mm polished brass bob.
Dials are supplied seperately. See dial section.

Minimum case depth (inside.) 105 mm
Dial centre to Weight bottom after 8 days 665 mm.
Dial centre to pendulum tip 590 mm.

H351.C. Grid-Iron pend' 115 mm
in stock.
OUT OF STOCK

Price: £298.00 (Excluding VAT at 20%)
Quantity:

HERMLE W 351.830 Side mounted gong allows for the reduced case depth.
Weight driven time train by two brass shelled weights on a yoke.
The yoke is suspended by a pulley on a bronze cable.
Fitted with Automatic night silence mechanism.
Supplied with a Grid-Iron pendulum with a 115 mm Polished Brass Bob.
Dials are supplied seperately.
See dial section.

Minimum case depth (inside.) 115 mm
Dial centre to Weight bottom after 8 days 665 mm.
Dial centre to pendulum tip 635 mm.

H351.D. Lyre pendulum
in stock.
OUT OF STOCK

Price: £298.00 (Excluding VAT at 20%)
Quantity:

HERMLE W 351.830 Side mounted gong allows for the reduced case depth.
Weight driven time train by two brass shelled weights on a yoke.
The yoke is suspended by a pulley on a bronze cable.
Fitted with Automatic night silence mechanism.
Supplied with a Lyre pendulum with a 100 mm polished Brass bob.
Dials are supplied seperately.
See dial section.

Minimum case depth (inside.) 115 mm
Dial centre to Weight bottom after 8 days 665 mm.
Dial centre to pendulum tip 620 mm.

H351.E. Grid-iron 140 mm
in stock.
OUT OF STOCK

Price: £308.00 (Excluding VAT at 20%)
Quantity:

HERMLE W 351.830 Side mounted gong allows for the reduced case depth.
Weight driven time train by two brass shelled weights on a yoke.
The yoke is suspended by a pulley on a bronze cable.
Fitted with Automatic night silence mechanism.
Dials are supplied seperately.
See dial section.

Minimum case depth (inside.) 115 mm
Dial centre to Weight bottom after 8 days 665 mm.
Dial centre to pendulum tip 670 mm.</li></ul>

H 771.A.
in stock.
OUT OF STOCK

Price: £47.90 (Excluding VAT at 20%)
Quantity:

Time piece only. 35 cm. version.
8 day spring driven.
Pendulum bob 70 mm diameter.

Minimum case depth (inside.) 75 mm
Dial centre to pendulum tip 315 mm.

H 241.A. Movement
in stock.
OUT OF STOCK

Price: £174.65 (Excluding VAT at 20%)
Quantity:

Hermle W241-840 Regulator movement.
Without dial. See H 241 dials in dial section.
Strikes on coil gong, once on the half hour and counts the hours.
Weight driven on metal cables.
Wound through the dial with a wooden handled cranked key.
Supplied with polished brass weight shell and weight fillings.
Complete with a wooden rod pendulum with 115 mm polished brass bob.

Minimum case depth (inside.) 105 mm
Dial centre to bottom of weight for 7 day run 803 mm, (868 for 8 day run). This is below the pendulum tip.

H 241.B. Movement
in stock.
OUT OF STOCK

Price: £174.65 (Excluding VAT at 20%)
Quantity:

Hermle W241-840 Regulator movement.
Without dial. See H 241 dials in dial section.
Strikes on coil gong, once on the half hour and counts the hours.
Weight driven on metal cables.
Wound through the dial with a wooden handled cranked key.
Supplied with polished brass weight shell and weight fillings.
Complete with a metal rod pendulum with 80 mm polished brass bob

Minimum case depth (inside.) 105 mm
Dial centre to bottom of weight for 7 day run 803 mm, (868 for 8 day run). This is below the pendulum tip.

H 241.C. Movement
in stock.
OUT OF STOCK

Price: £195.08 (Excluding VAT at 20%)
Quantity:

Hermle W241-840 Regulator movement.
Without dial. See H 241 dials in dial section.
Strikes on coil gong, once on the half hour and counts the hours.
Weight driven on metal cables.
Wound through the dial with a wooden handled cranked key.
Supplied with polished brass weight shell and weight fillings.
Complete with a Grid-Iron pendulum with 115 mm polished brass bob.

Minimum case depth (inside.) 105 mm
Dial centre to bottom of weight for 7 day run 803 mm, (868 for 8 day run). This is below the pendulum tip.

H 241.D. Movement
in stock.
OUT OF STOCK

Price: £195.08 (Excluding VAT at 20%)
Quantity:

Hermle W241-840 Regulator movement.
Without dial. See H 241 dials in dial section.
Strikes on coil gong, once on the half hour and counts the hours.
Weight driven on metal cables.
Wound through the dial with a wooden handled cranked key.
Supplied with polished brass weight shell and weight fillings.
Complete with a Lyre pendulum with 100 mm polished brass bob.

Minimum case depth (inside.) 105 mm
Dial centre to bottom of weight for 7 day run 803 mm, (868 for 8 day run). This is below the pendulum tip.

H 241.E. Movement
in stock.
OUT OF STOCK

Price: £205.28 (Excluding VAT at 20%)
Quantity:

Hermle W241-840 Regulator movement.
Without dial. See H 241 dials in dial section.
Strikes on coil gong, once on the half hour and counts the hours
Weight driven on metal cables.
Wound through the dial with a wooden handled cranked key.
Supplied with polished brass weight shell and weight fillings.
Complete with a Grid-Iron pendulum with 140 mm polished brass bob.

Minimum case depth (inside.) 105 mm
Dial centre to bottom of weight for 7 day run 803 mm, (868 for 8 day run). This is below the pendulum tip.

PS55.A. Regulator Movement
in stock.
OUT OF STOCK

Price: £394.00 (Excluding VAT at 20%)
Quantity:

Kieningers PS55, 66 cm Version.
Heavy duty movement, weight diven on metal ropes.
This version comes with Automatic night silence.
We have several combinations available. This has a Wooden rod pendulum with a 140 mm polished brass bob.
Supplied with a 178 mm 'Real Enamel' dial and suitable hands.
Please note the heavy brass mounting sled.
Supplied with suitable hands, brass weight shells and fillings.
The movement strikes once on the half hour and counts the hours on a heavy coil gong.

Case depth reuired 125 mm
Distance from dial centre to bottom of weights after 7 day run 720 mm (880 mm for 8 days).

PS55.B. Regulator Movement
in stock.
OUT OF STOCK

Price: £425.30 (Excluding VAT at 20%)
Quantity:

Kieningers PS55, 66 cm Version.
Heavy duty movement, weight diven on metal ropes.
This version comes with Automatic night silence.
We have several combinations available. This has a Grid-Iron pendulum with a 140 mm polished brass bob.
Supplied with a 178 mm 'Real Enamel' dial and suitable hands.Please note the heavy brass mounting sled.
Supplied with suitable hands, brass weight shells and fillings.
The movement strikes once on the half hour and counts the hours on a heavy coil gong.

Case depth reuired 125 mm
Distance from dial centre to bottom of weights after 7 day run 720 mm (880 mm for 8 days).

PS55.D. Regulator Movement
in stock.
OUT OF STOCK

Price: £404.71 (Excluding VAT at 20%)
Quantity:

Kieningers PS55, 66 cm Version.
Heavy duty movement, weight diven on metal ropes.
This version comes with Automatic night silence.
We have several combinations available. This has a Wooden rod pendulum with a 140 mm polished brass bob.
Supplied with a 200 mm 'Real Enamel' dial and suitable hands.
Please note the heavy brass mounting sled.
Supplied with suitable hands, brass weight shells and fillings.
The movement strikes once on the half hour and counts the hours on a heavy coil gong.

Case depth reuired 125 mm
Distance from dial centre to bottom of weights after 7 day run 720 mm (880 mm for 8 days).

PS55.E. Regulator Movement
in stock.
OUT OF STOCK

Price: £435.60 (Excluding VAT at 20%)
Quantity:

Kieningers PS55, 66 cm Version.
Heavy duty movement, weight diven on metal ropes.
This version comes with Automatic night silence.
We have several combinations available. This has a Grid-Iron pendulum with a 140 mm polished brass bob.
Supplied with a 200 mm 'Real Enamel' dial and suitable hands.
Please note the heavy brass mounting sled.
Supplied with suitable hands, brass weight shells and fillings.
The movement strikes once on the half hour and counts the hours on a heavy coil gong.

Case depth required 125 mm
Distance from dial centre to bottom of weights after 7 day run 720 mm (880 mm for 8 days).

RWS.A. One second beat, 240 mm dial
in stock.
OUT OF STOCK

Price: £502.80 (Excluding VAT at 20%)
Quantity:

We have marked this as *****SPECIAL VERSION****** Because of the pendulum length and the dial size.
This is intended for use in the large 9 light 'Lantern Clock.'
Westminster chime on 8 rod gong.
1 second beating wooden rod pendulum with 165 mm polished brass bob.
Driven by two weights mounted on a yoke. The weights are cased in polished brass.
The dial is 240 mm diameter, real enamel with a polished brass rim. Suitable hands are supplied.
The whole unit is mounted onto a cast brass sled.
We suggest that the movement is mounted in a dust free room and that the dimensions are checked befor you build your clock case.
Please note that the illustration shows a spring driven movement. We will change it later.

Minimum case depth (inside) 145 mm
Dial centre to pendulum tip 1064 mm

RWS.B. 178 dial, wooden rod pend
in stock.
OUT OF STOCK

Price: £460.60 (Excluding VAT at 20%)
Quantity:

Kieninger RWS movement. 66 cm version.
Westminster chime on 8 rod gong.
The time side is driven by two brass cased weights on a yoke. The Chime and the hour strike are spring driven.
Supplied with 178 mm 'Real Enamel' dial and suitable hands.
Wooden rod pendulum with 140 mm polishe brass bob.
Mounted on a cast brass sled.

Minimum case depth (inside) 130 mm
Dial centre to pendulum tip 617 mm

RWS.C. 178 dial, wooden rod pend
in stock.
OUT OF STOCK

Price: £491.90 (Excluding VAT at 20%)
Quantity:

Kieninger RWS movement. 66 cm version.
Westminster chime on 8 rod gong.
The time side is driven by two brass cased weights on a yoke. The Chime and the hour strike are spring driven.
Supplied with 178 mm 'Real Enamel' dial and suitable hands.
Grid-iron pendulum with 140 mm polished brass bob.
Mounted on a cast brass sled.

Minimum case depth 130 mm
Dial centre to pendulum tip 657 mm

RWS.E. 200 dial, wooden rod pend
in stock.
OUT OF STOCK

Price: £470.60 (Excluding VAT at 20%)
Quantity:

Kieninger RWS movement. 66 cm version.
Westminster chime on 8 rod gong.
The time side is driven by two brass cased weights on a yoke. The Chime and the hour strike are spring driven.
Supplied with 200 mm 'Real Enamel' dial and suitable hands.
Wooden rod pendulum with 140 mm polished brass bob.
Mounted on a cast brass sled.

Minimum case depth (inside) 130 mm
Dial centre to pendulum tip 617 mm

RWS.E. 200 dial, Grid pend'
in stock.
OUT OF STOCK

Price: £501.90 (Excluding VAT at 20%)
Quantity:

Kieninger RWS movement. 66 cm version.
Westminster chime on 8 rod gong.
The time side is driven by two brass cased weights on a yoke. The Chime and the hour strike are spring driven.
Supplied with 200 mm 'Real Enamel' dial and suitable hands.
Grid-Iron pendulum with 140 mm polished brass bob.
Mounted on a cast brass sled.

Minimum case depth (inside) 130 mm
Dial centre to Pendulum tip 657 mm

KRM1 Kieninger Regulator
in stock.
OUT OF STOCK

Price: £267.75 (Excluding VAT at 20%)
Quantity:

Kieningers 'J' Movement. 35 cm pendulum version.
Superb quality in a small package.
The movement and gong is ready mounted onto a steel plate that you simply screw to the back of your clock case.
Triple chime, plays wittington, Westminster and St Michael. Selected by a small lever.
Automatic night silence is built into the movement and is permenantly selected.
Complete with 150 mm dial. Hands metal rod pendulum. Everything you need to make your case into a clock.

Minimum case depth (inside.) 117 mm
Dial centre to pendulum tip. 310 mm

Online Catalogue | Clock Builders Supplies | Mechanical Clock Movements | Wall clock movements

Product Sections

Store Information

Best Sellers

Wall clock movements

A 1050 Sled for H 141

Price: £8.89 (Excluding VAT at 20%)

A 1051 Sled for H 351

Price: £34.78 (Excluding VAT at 20%)

H 131.A. Movement

Price: £81.36 (Excluding VAT at 20%)

H 141.A. Regulator

Price: £93.17 (Excluding VAT at 20%)

H 141.B. Regulator

Price: £96.19 (Excluding VAT at 20%)

H 341.A. Regulator

Price: £135.00 (Excluding VAT at 20%)

H 341.C. Regulator

Price: £135.00 (Excluding VAT at 20%)

H 341.D. Regulator

Price: £155.00 (Excluding VAT at 20%)

H351.A. Wooden rod

Price: £278.00 (Excluding VAT at 20%)

H 351.B. Metal Rod

Price: £278.00 (Excluding VAT at 20%)

H351.C. Grid-Iron pend' 115 mm

Price: £298.00 (Excluding VAT at 20%)

H351.D. Lyre pendulum

Price: £298.00 (Excluding VAT at 20%)

H351.E. Grid-iron 140 mm

Price: £308.00 (Excluding VAT at 20%)

H 771.A.

Price: £47.90 (Excluding VAT at 20%)

H 241.A. Movement

Price: £174.65 (Excluding VAT at 20%)

H 241.B. Movement

Price: £174.65 (Excluding VAT at 20%)

H 241.C. Movement

Price: £195.08 (Excluding VAT at 20%)

H 241.D. Movement

Price: £195.08 (Excluding VAT at 20%)

H 241.E. Movement

Price: £205.28 (Excluding VAT at 20%)

PS55.A. Regulator Movement

Price: £394.00 (Excluding VAT at 20%)

PS55.B. Regulator Movement

Price: £425.30 (Excluding VAT at 20%)

PS55.D. Regulator Movement

Price: £404.71 (Excluding VAT at 20%)

PS55.E. Regulator Movement

Price: £435.60 (Excluding VAT at 20%)

RWS.A. One second beat, 240 mm dial

Price: £502.80 (Excluding VAT at 20%)

RWS.B. 178 dial, wooden rod pend

Price: £460.60 (Excluding VAT at 20%)

RWS.C. 178 dial, wooden rod pend

Price: £491.90 (Excluding VAT at 20%)

RWS.E. 200 dial, wooden rod pend

Price: £470.60 (Excluding VAT at 20%)

RWS.E. 200 dial, Grid pend'

Price: £501.90 (Excluding VAT at 20%)

KRM1 Kieninger Regulator

Price: £267.75 (Excluding VAT at 20%)